The Wrapz 8118 is a fit over style. Designed to fit over most prescripition spectacles. The frame has an ingenious design where your normal spectacles sit on a special nose bridge. The maximum internal dimension (to fit your spectacles) are 140mm wide x 40mm deep. Typical spectacles such as those used in the photos to demonstrate are 135mm x 40mm. Remember when you measure the width you need to take the widest external dimension at the hinges. If your spectacles are alittle deeper they may still be OK but will drop slightly below the outer lens
TAC polarised lens
Tri Acetate Cellulose lenses are scratch resistant to offer a more durable lens.
The polarisation filter is designed to reduce surface glare such as you would get from snow, water or wet road conditions. Superb to combat low sun surface glare.
These are superb for Fishermen as they remove the surface glare from water allowing easier viewing below the surface.
This Single Lens is designed to flip up as seen in the photos.
Please note: The small side temple lenses in the arms are standard polycarbonate (UV400) and not polarised
Tac Polarised Lens
Polycarbonate Frame
Fit Over Design
UV400 Protection
Internal Hinge to Hinge width - 140mm
Supplied with Wrapz Polishing Pouch
Includes Polarisation Test Card
(View the card through the lens and see the image complete)
Lens External - Brown (Cat 2 to 3)
Lens Optical - Brown (Cat 2 to 3)
Frame Colour - Matte Brown
Call: .png)
